Pcl Settings - Sharp MX-C381 Operation Manual

Item
Print per unit
Output
Staple*
Quick File
*1 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other
specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a
width of 1 dot.
*2 Paper sizes that can be used with this function are A4, 8-1/2" x 14", and 8-1/2" x 11". (This function may not take
effect with some print methods.)
*3 Only effective when printing PDF, JPEG, and TIFF files.
*4 When a finisher is installed.

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4
• (Use Print per Unit)
• (Do not use Print per Unit)
• (Use Staple)
4
• (Do not use Staple)
• (Disabled)
• (Enabled)
Description
Specify the symbol set used for
printing.
Use this to select the font used for
printing.
This setting is used to select how
the printer responds when a line
feed command is received.
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
Selections
Select from 35 items.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
• (Enabled)
• (Disabled)
7-22
SYSTEM SETTINGS
Selections
Contents