Table of Contents
Advertisement
14. Remove any seals from the back of the product, and install the cable clamps in any of the locations
shown here.
Note: You can route the product's power cord or other connection cables through the clamps.
15. Reinsert the black ink pack tray and close the ink pack tray cover.
16. Reinsert the paper cassette you removed and reattach the output tray.
17. Connect the power cord and other connection cables, then plug in the product.
Parent topic:
Related references
Optional Accessories and Replacement Parts
Installing the Optional Paper Cassette Units
You can install up to three optional paper cassette units to provide more paper capacity. You must first
install the optional printer stand before you install an optional cassette unit.
1. Turn off the product, and unplug the power cord and any connected cables.
Warning: To avoid electric shock, make sure you unplug the power cord.
2. Remove the paper cassette unit from its packaging and remove any protective materials.
Installing or Using Optional Parts
25
Advertisement
Table of Contents
