WorkForce
545/645 Series
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
Caution:
Do not remove the plastic strip shown below. It is part of the
Automatic Document Feeder.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution:
Do not connect to your computer yet.
*412191500*
*412191500*
2
French control
panel sticker
(included for
Canada only)
3
1
2
3
4
5
6
7
8
Note:
control panel. For more information, see the online User's Guide.
4
1
Raise the control panel and press the
Note:
If you want to lower the control panel, squeeze the
release bar underneath.
Caution:
To avoid damaging your product, always squeeze the
release bar to lower the control panel.
Select settings
To select English as your language, press OK.
If you want to change the language, press
select it, then press OK.
Select your country/region and press OK.
Select Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
Select the date format and press OK.
Press the number keys to enter the date and press OK.
Select the time format (12h or 24h) and press OK.
Press the number keys to enter the time. Then press
or
to select AM or PM, if necessary.
Press OK.
You can change the date and time settings using the product's
Install ink cartridges
Lift up the scanner unit.
On button.
or
to