Table of Contents
Advertisement
• Load long paper by allowing the paper to roll over as shown. Select the user-defined setting as the
paper size setting.
6. If the Paper Size Auto Detect setting is enabled, your product automatically detects the size of the
paper you loaded. Otherwise, select the
paper you loaded on the LCD screen as necessary.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first, no matter which way your document faces.
• Load letterhead or pre-printed paper top edge first.
• Do not load paper above the arrow mark inside the edge guides.
• Check the paper package for any additional loading instructions.
Caution: Do not load the following papers; they may cause paper jams, smears on the printout, or
damage to the printer.
• Papers that are wavy or damp
• Papers that have not dried after printing on one side
• Papers that are wadded or curled
Paper Setting button and select the size and type of
106
Advertisement
Table of Contents
