Counter Check; Counter Clear - Sharp R-21ATP Operation Manual

R-21at operation-manual gb
Hide thumbs Also See for R-21ATP:
Table of Contents

Advertisement

A30317, SUK R-21AT O/M

COUNTER CHECK

Set the counters to "0" before using your new oven (see COUNTER CLEAR below) to keep a record of the ovens use.
Example: If you want to know the total amount of times the oven has been used, and the number of times each pro-
gramme has been used. In the following example, the total time was 8268 and memory 1 was 513.
Step
Procedure
1
Press the CHECK pad twice.
2
To check memory 1 usage,
press the NUMBER pad
Note: 1. To cancel Counter Check mode, press the CHECK pad.
Each counter can count the times up to 9999, and it will return to 0 if it is over 9999.
2. To check the times of manual cooking, press the SELECT TIME pad at Step 2 instead of the NUMBER pad.
To check the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST pad at Step 2
instead of the NUMBER pad.

COUNTER CLEAR

Each number of times can be cleared.
Example: Suppose you want to clear the times of memory 1.
Step
Procedure
1
Press the CHECK pad twice.
2
Press the NUMBER pad
3
Press the SET pad.
Note: 1. To cancel Counter clear mode, press the CHECK pad.
2. To clear the times of manual cooking, press the SELECT TIME pad at Step 2 instead of the NUMBER pad.
To clear the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST pad at Step 2
instead of the NUMBER pad.
3. To clear total using times, skip Step 2.
Pad Order
.
Pad Order
.
15
Display
X 2
CHECK will flash on and off.
(Total times used)
NO.
After about 1 sec.
(Times memory 1 was used)
Display
X 2
CHECK will flash on and off.
(Total times used)
NO.
After about 1 sec.
(Times memory 1 was used)
CHECK
CHECK
CHECK
CHECK
CHECK
CHECK
CHECK

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-21at

Table of Contents