Table of Contents
Advertisement
10.1 Interface to alarm system
To define an interface for an alarm system, select "Events" in the main menu, then click on
"Intrusion".
Arm output:
You can use the Arm Output to switch a connected alarm system from "armed" to "disarmed"
and vice versa. Relay 1 is the default "arm"/"disarm" option.
Type:
Select between the various relay types required by the alarm panel you have connected.
Open latched:
Closed latched:
Open timed:
Closed timed:
Ready for arm:
The Ready for Arm option requires a signal from the burglar alarm system on the wAppLoxx
Pro Control. If the alarm panel is not ready and the "Ready for arm" input is not active, the
wAppLoxx Pro Control prevents the system from "arming" and signals this via the wAppLoxx
Cylinder. Input 1 is used by default (see Chapter 3).
wAppLoxx Pro Control Complete Instructions
[58]
Relay closed when "armed"
Relay open when "armed"
Relay closes for one second when "armed"
Relay opens for one second when "armed"
Advertisement
Table of Contents
