Table of Contents
Advertisement
9. Cameras
It is possible for video surveillance to be integrated into a wAppLoxx system.
Up to 10 IP cameras can be integrated into a wAppLoxx Pro Control.
Connecting an IP camera to wAppLoxx
Click on "Cameras" in the administration menu to see all IP cameras already installed. If you
would like to add a new IP camera, click on the green plus sign.
If you are using the new wAppLoxx app, it is sufficient to enter the local connection data of the
desired camera in order to access the camera even externally via the app. A connection to the
ABUS server is no longer absolutely necessary.
If you are using the wAppLoxx app 1.0, you must additionally enter the external connection
data through the ABUS server to have external access to the camera.
You can find out how to connect an IP camera to the ABUS server in the instructions for your
ABUS IP camera. After you have registered your desired camera on the ABUS server, enter
the data assigned by the ABUS server into the configuration menu. You can now add the
camera to the desired wAppLoxx cylinder.
wAppLoxx Pro Control Complete Instructions
[56]
Advertisement
Table of Contents
