Table of Contents
Advertisement
4. Commissioning the wAppLoxx Pro Control
Before you begin commissioning, check that the microSD card supplied has been inserted
correctly. This saves the number of openings per cylinder and is required to ensure the battery
warning functions correctly via the WLX - CTRL PRO . Please only use the MicroSD card
supplied.
Option 1:
Connecting the wAppLoxx Pro Control directly to a PC/laptop.
1. Connect the wAppLoxx Pro Control to your PC/laptop via a network cable.
2. Connect the wAppLoxx Pro Control to the power supply.
The wAppLoxx Pro Control automatically detects whether a direct connection between
the PC/laptop and the wAppLoxx Pro Control should be established.
3. The IP address of the wAppLoxx Pro Control is 192.168.0.50 when delivered.
4. Configure the network interface of your PC/laptop as follows:
wAppLoxx Pro Control Complete Instructions
[11]
IP address:
Subnet mask:
Standard gateway:
Preferred DNS server:
192.168.0.2
255.255.255.0
192.168.0.1
192.168.0.1
Advertisement
Table of Contents
