6.4 Network
Receive network settings from DHCP:
Check this box if the wAppLoxx Pro Control is connected to a router with a DHCP function. All
connection data is now automatically assigned by the router.
If no DHCP function is available, you can enter the connection data manually. Contact your
network administrator for assistance if necessary.
IP address:
IPv6 mode:
Subnet mask:
Primary DNS:
Secondary DNS:
Gateway:
wAppLoxx Pro Control Complete Instructions
[31]
IP address of the wAppLoxx Pro Control
For switching to IPv6 mode (this function is set up but not yet active).
Network subnet mask
Primary DNS server for the network
Secondary DNS server for the network
Standard gateway for the network