Setting The User Level - Samson Media 7 5007-1 Mounting And Operating Instructions

Start-up and configuration
− The option module wizard can be started from the [Device settings | 2] menu/[Option
modules | 2.4]/[Overview of option modules | 2.4.1 und 2.4.1.1] by selecting a slot/
option module ('Specialist' user level only).
− If no settings are entered within five minutes, the display returns to the start screen.

7.2 Setting the user level

The differential pressure meter has two user levels with different access privileges:
− Maintenance staff: values and parameters can be selected and read in this user level.
Changes are not possible in this level.
− Specialist: all values can be accessed and parameters changed in this user level. This us-
er level can be password-protected to prevent unauthorized access.
1. Press key (in start screen) to go to the main menu.
2. Select [Start-up| 1] with
3. Select [User level | 1.2] with
4. Press key and select 'Specialist' with
5. Press key to confirm the setting.
Activating password protection
The password can only be changed and activated in the Specialist user level.
1. Press key (in start screen) to go to the main menu.
2. Select [Start-up| 1] with
3. Select [Password protection | 1.11] with
4. Press key to activate password protection.
Î The default password is 1234. To change the password, proceed as follows:
1. In the [Start-up | 1] menu, select [Password | 1.12] with
key.
2. Press key. Select the digit within the password with
3. Press key. Change the number (0 to 9) within the password with
4. Confirm with
5. After selecting all digits of the password, press
7-4
or key and confirm with
or
or key and confirm with
key (proceed in the same way for the rest of the password).
key and confirm with
or key.
or key.
key.
key.
key.
key.
or key and confirm with
or key.
or
EB 9510 EN
key.