Modify Hcs Reselection Parameters - Huawei ePico3801 User Manual

ePico3801
User Guide
Procedure
Step 1 Log in to the APM. Choose Configuration > Single Configuration and select an ePico3801 to
be maintained. Then, click Configure to enter the configuration window.
Step 2 Choose Terminal Parameter > WIRELESS > Configuration in the navigation tree to
configure the automatic pilot adjustment parameters.
1.
2.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End

5.4.3 Modify HCS Reselection Parameters

This chapter describes how to modify the hierarchical cell structure (HCS) parameters of the
ePico3801. The ePico3801 supports the preferential camping-on mode of the HCS. You can
adjust the configuration to ensure that the ePico cell has a high priority. In this case, the UE
preferentially selects an ePico cell to camp on it. This requires that the HCS parameters are also
set in the macro network.
Prerequisite
l
l
l
Context
The HCS priority of the ePico cell is set to the highest value. In addition, the HCS parameters
and cell reselection parameters of the macro cell are set. In this case, UEs can preferentially
reselect the ePico cell to be a serving cell.
Procedure
Step 1 Log in to the APM. Choose Configuration > Single Configuration and select an ePico3801 to
be maintained. Then, click Configure to enter the configuration window.
Step 2 Choose Terminal Parameter > WIRELESS > Configuration > CELLHCS in the navigation
tree to set the HCS parameters.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
Issue 01 (2009–09–23)
Choose GSMCELL to add the GSM neighboring cell information.
Choose GSMNCELL to configure the GSM neighboring cells.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
The core network must support the HCS and the HCS parameters are set in the macro
network.
The parameters of the ePico zone have been set successfully.
You have logged in to the AP Manager (APM). The login account belongs to the
Administrator or Operators group.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Reconfiguring the ePico3801
5-7