Reconfiguring The Epico3801 - Huawei ePico3801 User Manual

ePico3801
User Guide
About This Chapter
This chapter describes common reconfiguration items during the normal running of the
ePico3801.
5.1 Configuring Automatic Network Planning Parameters
This chapter describes how to configure the automatic network planning parameters for the
ePico3801 on the AP Manager (APM). For the deployment of most ePico3801s, the automatic
network planning mode ensures a good radio environment.
5.2 Setting ePico Cell Parameters
This chapter describes how to set or modify the ePico cell parameters manually. This mainly
introduces common configuration methods of the ePico cell parameters, including modifying
the cell status, modifying the cell frequency and scramble code, and setting the maximum TX
power.
5.3 Modifying Automatic Pilot Adjustment Parameters
This chapter describes how to modify the automatic pilot adjustment parameters. You need to
set the automatic pilot adjustment parameters for the ePico3801 to ensure that the interference
is effectively reduced and the voice quality meets the requirements. In normal cases, these
parameters need not be modified after the parameter setting is complete.
5.4 Adjusting Mobility Management Parameters
This chapter describes how to adjust the ePico3801 parameters related to the cell reselection and
handover if required. In normal cases, the information of the ePico cell is configured through
automatic network planning. No manual configuration is required.
5.5 Adjusting the Transport Network
This chapter describes how to adjust the transport network of the ePico3801.
5.6 Adjusting the ePico3801 Functions
This chapter describes how to adjust the application of the ePico3801 basic functions. The basic
functions consist of the HSPA status, emergency call redirection switch, permission reject
reason, location indication mode, differentiated billing mode, and location positioning mode.
Issue 01 (2009–09–23)
5

Reconfiguring the ePico3801

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Reconfiguring the ePico3801
5-1