ePico3801
User Guide
Power Consumption Specifications
Table 2-10 Power Consumption Specifications of the ePico3801
Item
The TX power is 100 mW
(20 dBm).
The TX power is 250 mW
(24 dBm).
Environmental Specifications
Table 2-11 Environmental specifications of the ePico3801
Item
Temperature
Relative humidity
Altitude
Air pressure
2.5 Application Scenarios
The ePico3801 is widely used for indoor coverage in small and medium enterprises (SMEs),
SOHOs, schools, and office buildings and for hot-spot indoor coverage at pubs, airports, stores,
and hotels.
2.5.1 Access Networking Scenarios
The ePico3801 is connected to an enterprise LAN or modem, which connects the ePico3801 to
the public IP network. Then, the public IP network connects the ePico3801 to the AG, and the
AG connects the ePico3801 to the UMTS core network. Through convergence and UMTS traffic
and signaling forwarding performed by the AG, routing towards the UMTS core network is
achieved. The ePico3801 can be connected to the public IP network in LAN access mode or
modem access mode.
2.5.2 Installation Scenarios
If installed in a factory or office building, the ePico3801 does not require a private equipment
room.
Issue 01 (2009–09–23)
AC/DC power adapter
PoE power supply
AC/DC power adapter
PoE power supply
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Introduction to the ePico3801
Specification
≤ 28W
≤ 30W
≤ 32W
≤ 35W
Specification
Operating temperature: -5°C to +40°C
Storage temperature:-40°C to +70°C
Relative humidity of the operating
environment: 5% RH to 95% RH
Relative humidity of the storage
environment: 5% RH to 95% RH
-60 m to +4000 m
70 kPa to 106 kPa
2-15