Huawei ePico3801 User Manual page 10

About This Document
3 ePico3801 Initial Configuration
This chapter describes how to perform initial configuration of the ePico3801 on the WebUI so
that users can perform the configuration of the ePico3801 according to the access and
authentication mode.
4 Commissioning the ePico3801
This chapter describes the commissioning and verification after the installation of the ePico3801
hardware. The commissioning ensures that the ePico3801 works properly as designed.
5 Reconfiguring the ePico3801
This chapter describes common reconfiguration items during the normal running of the
ePico3801.
6 Maintaining the ePico3801
This chapter describes how to maintain the ePico3801. After the ePico3801 is put into use, you
need to perform routine maintenance on the ePico3801 to ensure the proper running of the
ePico3801.
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
General Conventions
The general conventions that may be found in this document are defined as follows.
Convention
Times New Roman
2
Description
Indicates a hazard with a high level of risk, which if not
avoided,will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided,could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or supplement
important points of the main text.
Description
Normal paragraphs are in Times New Roman.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ePico3801
User Guide
Issue 01 (2009–09–23)