Modifying Automatic Pilot Adjustment Parameters - Huawei ePico3801 User Manual

5 Reconfiguring the ePico3801
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End

5.3 Modifying Automatic Pilot Adjustment Parameters

This chapter describes how to modify the automatic pilot adjustment parameters. You need to
set the automatic pilot adjustment parameters for the ePico3801 to ensure that the interference
is effectively reduced and the voice quality meets the requirements. In normal cases, these
parameters need not be modified after the parameter setting is complete.
Prerequisite
l
l
Context
ePico3801 supports two automatic pilot adjustment modes: fast automatic pilot adjustment based
on dialing and period automatic pilot adjustment based on measurement.
Procedure
Step 1 Log in to the APM. Choose Configuration > Single Configuration and select an ePico3801 to
be maintained. Then, click Configure to enter the configuration window.
Step 2 Choose Terminal Parameter > WIRELESS > Configuration in the navigation tree to
configure the automatic pilot adjustment parameters.
1.
2.
3.
4.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
5-4
NOTE
If the maximum TX power of the UE is too low, the UE may not receive the AP signals, and thus
the UE cannot process services. If the maximum TX power is too high, the uplink interference of
other cells is generated.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
The parameters of the ePico zone have been set successfully.
You have logged in to the AP Manager (APM). The login account belongs to the
Administrator or Operators group.
Choose PCPICHPWR to set the BCH transmit power from the PCPICH transmit power
(PCPICH).
Choose AUTOPOWER to set the automatic pilot adjustment algorithm based on calls.
Choose AUTOPOWERSTAT to set the automatic pilot adjustment algorithm based on
measurement.
Choose AUTOTESTNUM to set the automatic pilot test number of the ePico3801.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ePico3801
User Guide
Issue 01 (2009–09–23)