Solutions When Network Alert E-Mails Are Not Received; Solutions When The Image Contains Static During Network Projection - Epson LightScene EV-110 User Manual

Hide thumbs Also See for LightScene EV-110:
Table of Contents

Advertisement

• Make sure the SD card is not write-protected.
• Make sure you use an SDHC card of Class 10 or higher with a maximum capacity of 32GB, or an SD
card formatted in FAT16 or FAT32.
Parent topic:
Related tasks
Controlling a Networked Projector Using a Web Browser
Inserting an SD Card

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure your electrical outlet or power source is functioning properly.
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network
Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Connect to a wired LAN, or to a wireless LAN with the Connection Mode
setting set to Advanced.Change the Port setting according to your network environment.
Parent topic:
Related references
Network Projector E-mail Alert Messages
Related tasks
Setting Up Projector Network E-Mail Alerts

Solutions When the Image Contains Static During Network Projection

If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
Solving Network Problems
Solving Network Problems
182

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lightscene ev-115

Table of Contents