1. Hold down the Effect button on the remote control for about five seconds or until you see this menu.
2. Press the down arrow to select Password and press
You see the prompt "Change the password?".
3. Select Yes and press
4. Press the number buttons to set a four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press Esc to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
Adjusting Projector Features
Enter.
124
Enter.