Setting Up The Projector; Projector Placement - Epson LightScene EV-110 User Manual

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Attaching and Removing the Cable Clips
Connecting to a Computer for HDMI Video and Audio
Connecting to an HDMI Video Source
Connecting to a Streaming Media Player
Connecting to Bluetooth Audio Devices
Connecting to External Sensor Devices
Connecting to External Speakers
Inserting an SD Card
Installing Batteries in the Remote Control
Related concepts
Image Shape
Related references
Projector Setup Settings - Extended Menu
Projector Placement
Your projector is designed to be installed on a wall or ceiling (with the included mount).
You can also place the projector on almost any flat surface (with the optional floor stand) to project an
image in a portable setup, or on a lighting track (with the optional lighting track mount).
Keep these considerations in mind as you select a projector location:
• Follow the instructions in the Installation Guide to install the projector on a wall or ceiling.
• If installing on a lighting track, use only the optional lighting track mount (ELPMB66).
• If the projector is not mounted, place it on a sturdy, level surface using the optional floor stand
(ELPMB55).
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
Projector Setup and Installation Options
25