Epson LightScene EV-110 User Manual page 199

Hide thumbs Also See for LightScene EV-110:
Table of Contents

Advertisement

• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,
excessive dust, vibration, or shock.
• Do not use the projector where flammable or explosive gases may be present.
• Do not use or store the projector or remote control in a hot location, such as near a heater, in direct
sunlight, or in a closed vehicle.
• Do not use the projector outside of the required temperature range below:
41 to 104 °F (5 to 40 °C)
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.
• Do not block the slots and openings in the projector case. They provide ventilation and prevent the
projector from overheating. If you are setting up the projector near a wall, leave at least 11.8 inches
(30 cm) of space between the wall and the projector.
• If you are using two or more projectors side-by-side, leave at least 20 inches (50 cm) of space
between the projectors to allow for proper ventilation.
• If you are using the projector at an altitude that exceeds 4,921 feet (1,500 m), make sure to set the
High Altitude Mode setting to On.
• Do not operate the projector in a closed cabinet unless proper ventilation is provided.
• Do not block the lens during projection using a book or any other object, especially flammable objects.
This could damage the projector or cause a fire.
• Do not touch the lens with your fingers. Doing so may leave a reside on the lens and cause projection
quality to deteriorate.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or
in direct sunlight for long periods of time. Doing so may cause damage to the case.
• When storing the projector, remove the batteries from the remote control.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not
bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Do not place your hand or any object near the air exhaust vent. The high temperature could cause
burns, fire, or other damage.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially
flammable objects, near the projector. Never spill liquid of any kind into the projector.
199

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lightscene ev-115

Table of Contents