Table of Contents
Advertisement
Related references
Event ID Code List
Network Settings - Network Menu
Administration Settings - Management Menu
Related tasks
Setting the Date and Time
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in window,
enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the
password. The default password is admin.
• Avoid connecting via a proxy server.
• Make sure you have access to the network the projector is on.
• Check the IP address on the projector, then reenter the IP address in the browser search bar.
Note: The user ID and password are case sensitive.
Parent topic:
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network Mail
Notification menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Change the Port setting according to your network environment.
Parent topic:
Solving Network Problems
Solving Network Problems
320
Advertisement
Table of Contents
