Registering A Digital Certificate On The Projector - Epson LightScene EV-110 User Manual

1. Open the Epson Web Control from your Web browser.
2. Select Developer's Menu.
3. Set the Enable API setting to On.
4. Enter one of the following Web APIs to operate the projector:
URL
http://<ip>/api/v01/contentmgr/remote/power/on GET/POST/PUT
http://<ip>/api/v01/contentmgr/remote/power/off
http://<ip>/api/v01/contentmgr/playlist/play/:id
http://<ip>/api/v01/contentmgr/playlist/stop
Note: In the above URLs, enter the IP address for the projector in the <ip> field. For example, a URL
instructing a projector with the IP address 192.168.0.2 to playback playlist ID 3 would look like this:
http://192.168.0.2/api/v01/contentmgr/playlist/play/3
If secure HTTP is enabled, change the http in the URL to https.
Parent topic:
Related tasks
Controlling a Networked Projector Using a Web Browser

Registering a Digital Certificate on the Projector

Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files.
Note: You can register a digital certificate over a network. However, be sure to register just once or the
certificate may not install correctly.
Importing a Web Server Certificate Using the Projector Menus
Registering Digital Certificates from a Web Browser
Digital Certificate Types
Parent topic:
Using the Projector on a Network
Using the Projector on a Network
Supported methods
69
Description
Turns the projector on
(WebAPI may not
respond immediately)
0 to 63 (default is 128)
0 to 7 (default is 0)
0 to 31 (default is 128)