Solutions When The Image Contains Static During Network Projection; Solutions When Network Alert E-Mails Are Not Received; Solutions To Problems Using Content Playback - Epson EB-PU1006W User Manual

Solutions When the Image Contains Static During Network Projection

If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic:

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network
Notifications menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Connect to a wired LAN, or to a wireless LAN with the Connection Mode
setting set to Advanced.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu

Solutions to Problems Using Content Playback

If you cannot play back a playlist correctly, try the following solutions:
• Check the following on all projectors:
• All projectors are the same model. If any of the projectors are a different model or have a different
resolution, synchronized playback may not be performed properly.
• Make sure the name, date, and time settings are correct.
Solving Network Problems
Solving Network Problems
297