Setting Up Web Api - Epson LightScene EV-110 User Manual

Channel/Function
10 Content playback Playlist 41
11 Power control
13 Lock
Note: If you are controlling the projector using Art-Net and operating it from the remote control, settings
made by the DMX controller or application software may differ from the projector's actual status. If you
want to apply all the channel controls to the projector, set Channel 13 to Cannot control, then set it back
to Can control.
Parent topic:

Setting Up Web API

You can setup Web API from a Web browser and operate the projector using Web API.
Note: You can authenticate Web API communications using API authentication (Digest authentication).
The user name for API authentication is EPSONWEB; use the password that is set for Web Control
Password.
Operation
Playlist 42
Playlist 43
Playlist 44
Playlist 45
Playlist 46
Playlist 47
Playlist 48
Playlist 49
Playlist 50
Non-operational
Power off
Non-operational
Power on
Cannot control
Can control
Using the Projector on a Network
Parameters
164 to 167
168 to 171
172 to 175
176 to 179
180 to 183
184 to 187
188 to 191
192 to 195
196 to 199
200 to 203
204 to 255
0 to 63 (default is 128)
64 to 191
192 to 255
0 to 127 (default is 0)
128 to 255
68
Description
Turns the projector
power on or off
Enables/disables Art-
Net operations