Senco F-35XP Operating Instructions Manual page 8

EN
WARNING
Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Operators and others in work area MUST wear safety glasses with side shields.
Keep fingers AWAY from trigger when not driving fasteners, to avoid accidental firing.
Choice of triggering method is important. See page 11 for triggering options.
Never point tool at yourself or others in work area.
Always point the tool away when connecting battery.
Do not alter or remove trigger or safety.
Tools shall not be modified without written approval of the manufacturer.
Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
Battery Use
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for SENCO battery charger VB0192 (EU) and VB0198
(UK).
Before using SENCO battery charger VB0192 (EU) and VB0198 (UK), read all instructions and cautionary markings on
(1) battery charger, and (2) battery.
Do not expose charger to water, rain, or snow.
Use indoors.
Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury
to persons.
To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
SAFETY WARNINGS
Tool Use
8