Senco F-35XP Operating Instructions Manual page 15

BATTERY DISPOSAL
• not dispose electric tools, batteries/rechargeable batteries together with houshold waste material.
• Electric tools and batteries that reached the end of their life must be collected separately and returned to an
• Check with your local authority or retailer for recycling advice and collection point.
BATTERY TRANSPORT
• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• DO NOT transport batteries that are cracked or leak.
Maintenance
Read section titled "Safety Warnings" before maintaining tool.
1. With battery removed, make daily inspection to ensure free movement of nosepiece and trigger. Do not use tool if nosepiece or
trigger sticks or binds.
2. Lubrication of the feed system is not necessary. DO NOT OIL.
3. Wipe tool clean daily and inspect for wear, especially the bit and nosepiece. Replace as necessary.
Repairs other than those described here should be performed only by trained,
WARNING
qualified personnel.
Accessories
SENCO offers a full line of accessories for your SENCO tools, including:
• Battery
• Belt Hook
• Battery Charger
• Storage Bag
• Safety Glasses
• Extended Magazine
For more information or a complete illustrated catalogue of SENCO accessories, ask your representative.
Fastener Specifications
34 Degree
Senco A
A
SENCO
Fastener Code
inches mm
Fastener Code inches mm
2 50
GE 2 50
GE
2-3/8 60
2-3/8 60
2 50
GC 2 50
2-1/4 2-1/4 57 57
GC
2-3/8 60
2-3/8 60
2-1/2 65
2-1/2 65
HC 3 75
HC 3-1/2 90
HE 3 75
HE 3 75
HF 3 75
HF 3 75
KC 3 75
3 75
3-1/4 83
KC 3-1/4 83
3-1/2 90
3-1/2 90
MC 3 75
3/1/4 83
3 75
MC
3-1/4 83
* Rounded to
Rounded to

nearest 5mm
nearest 5mm
TOOL OPERATION
environmentally compatible recycling facility.
GE GC
A A
.113"
.113"
2,9 mm
2,9 mm
HC HE
A A
.120"
3,1 mm
.120"
3,1 mm
15
HF KC
A
A
.120"
3,1 mm
.131"
3,3 mm
EN
MC
A
.148"
3,8 mm