Saving Of Unit/Light Source/Csco/Ld Chromaticity - Sony VPL-F635HZ Service Manual

2-6-5. Saving of Unit/Light Source/CSCO/LD Chromaticity Correction/Light
Source Setting Data
1. Connect the power cord and set this unit to standby state.
2. Double-click QuickAccess3.exe to start the application.
3. Select a target model on the Model pull-down menu.
4. Select Read from Projector on the Read/Write pull-down menu.
5 Select the data type (Unit/Light Source/CSCO/LD Chromaticity Correction/Light Source Setting) on
the Data Type pull-down menu.
6. Click the [Next] button.
7. Click the [Browse...] button.
The file selection window is displayed.
8. Select the destination file for the obtained data.
9. Click the [Next] button.
10. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
11. Click the [Next] button.
The window displaying the model name of this unit, serial number, and the file path of the destination
of the obtained data to save is displayed.
12. Click the [OK] button.
The saving starts. Completed is displayed after completed.
13. Disconnect the power cord from this unit.
14. Click the [Complete] button.
VPL-FHZ65
2-21 (E)