Installation/Removal Of Lens Assembly - Sony VPL-F635HZ Service Manual

1-7. Installation/Removal of Lens Assembly

n
. Be careful not to drop the lens assembly.
. Do not touch the lens assembly portion.
. Do not work with this unit suspended from the ceiling.
Removal
n
The lens assembly cannot be removed unless it is returned to the center position.
[LENS|RELEASE] button
Lens assembly
1. Turn on the power of this unit.
2. Press the [SHIFT] button of this unit or the [LENS|SHIFT] button of the remote control, then press
the [RESET] button of the remote control.
The lens assembly returns to the center position.
3. Turn off the power of this unit, then disconnect the power cord.
4. Press the [LENS|RELEASE] button, then remove the lens assembly by rotating it in the counter-
clockwise direction (3).
1-30 (E)
VPL-FHZ65