Sony VPL-FHZ65 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. VPL-FHZ65
  6. Operating instructions manual

Sony VPL-FHZ65 Operating Instructions Manual

Hide thumbs Also See for VPL-FHZ65:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
Data
Projector

Operating Instructions

Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-FHZ65/FHZ60
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2015 Sony Corporation
4-573-698-12 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony VPL-FHZ65

Summary of Contents for Sony VPL-FHZ65

  • Page 1: Operating Instructions

    Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-FHZ65/FHZ60 Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. © 2015 Sony Corporation...

  • Page 2: Table Of Contents

    Table of Contents Overview Adjustments and Settings Using a Menu Location and Function of Controls ..4 Main Unit ........4 Using a Menu ........23 Terminals ........5 The Picture Menu ......24 Remote Commander and Control The Screen Menu ......27 Panel .........
  • Page 3 Attaching ........53 Specifications ........54 Projection Distance and Lens Shift Range ........... 61 Dimensions ........64 Index ..........68...

  • Page 4: Location And Function Of Controls

    B Overview Location and Function of Controls Main Unit a Lens (page 52) l Control panel (page 6) b Front panel m Antitheft lock Connects to an optional antitheft cable c Side cover (page 51) manufactured by Kensington. For details, visit the Kensington’s web d Ventilation holes (intake) site.

  • Page 5: Terminals

    Terminals g OUTPUT B Input (page 9) Video: DVI-D output terminal (DVI-D) a INPUT A h AUDIO OUT Video: RGB/YP input terminal Audio: Audio output terminal (AUDIO) (RGB/YP Audio: Audio input terminal (AUDIO) Note These terminals output projected images or b INPUT B audio.

  • Page 6: Remote Commander And Control Panel

    l AC IN (-) socket Connects the supplied AC power cord. Remote Commander and Control Panel Remote Commander a Turning on the power/Going to standby ? (On) key 1 (Standby) key b Selecting an input signal (page 17) INPUT key Direct input select keys The E, F, and S VIDEO keys are not used with this projector.
  • Page 7 Combinations of input signals Use this key when inputting a computer signal. But it may not be enabled, Main picture Subpicture depending on the resolution of the input INPUT B (DVI-D) signal and when displaying two pictures. 1 Press the D ZOOM + key to display INPUT C (HDMI) INPUT A (RGB) the digital zoom icon on the projected...
  • Page 8 i CONTROL S output terminal ECO Mode menu Connects to the CONTROL S input terminal on the projector with a ECO Mode connecting cable (stereo mini plug (not supplied)) when using the Remote User Commander as a wired one. You do not need to install batteries in the Back Remote Commander, as the power is 2 Press the V/v key or ECO MODE key...

  • Page 9: Connecting The Projector

    B Preparation Connecting the Projector Notes • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. •...

  • Page 10: Connecting Video Equipment

    Notes • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) • The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or CEC (Consumer Electronics Control) signal.
  • Page 11 Notes • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) • The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or...

  • Page 12: Connecting An External Monitor And Audio Equipment

    To fix the HDMI cable Fix the cable to the cable tie holders at the sides of the terminals using a commercially available cable tie, as shown in the illustration. Use a cable tie of less than 1.9 mm × 3.8 mm in thickness. Cable tie (commercially available) Cable tie holders Connecting an External Monitor and Audio Equipment...

  • Page 13: Connecting Network Equipment

    OUTPUT B Display equipment DVI-D input DVI-D cable (not terminal supplied) Note This terminal outputs projected images. The images are output when a computer signal is input from the DVI-D input terminal (INPUT B). However, if the signal input from INPUT B is protected by HDCP, the signal is not output to OUTPUT B.

  • Page 14: Connecting To Hdbaset™ Equipment

    Notes for connecting this unit and the HDBaseT transmitter • Ask a professional or Sony dealer to perform wiring. If wiring is not correct, the transmission characteristics of the cable will not be achieved, and image or sound may break up or you may experience unstable performance.
  • Page 15 • The transmittable distance of the cable is 100 m (approx. 328 feet) maximum. If it exceeds 100 m (approx. 328 feet), it may cause the image or the sound to break up, or cause a multifunction in LAN communication. Do not use the HDBaseT transmitter beyond the transmittable distance.

  • Page 16: Attaching The Terminal Cover

    Attaching the terminal cover Example of the cable layout in the cover You can attach the supplied terminal cover to prevent dust from entering the terminals to maintain a neat appearance. Fit one shaft on the side of the terminal cover into the hole on the bottom, then fit the other shaft by bending the cover slightly.

  • Page 17: Projecting/Adjusting An Image

    B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance and Lens Shift Range” (page 61) and projected image sizes, see Input select window Wall outlet...

  • Page 18: Adjusting The Focus, Size, And Position Of The Projected Image

    Adjusting the Focus, Size, and Position of the Projected Image Focus Size (Zoom) Position (Lens shift) When attaching the Electric When attaching the Electric Press the LENS SHIFT/SHIFT focus lens zoom lens key on the projector or the Press the FOCUS key on the Press the ZOOM key on the Remote Commander then press the V/v/B/b key to adjust the...

  • Page 19: Correcting For Trapezoidal Distortion Of The Projected Image (Keystone Adjustment)

    If the projected image is Correcting for Trapezoidal trapezoidally-distorted in the lateral Distortion of the Projected plane Image (Keystone Adjustment) If the screen is tilted, or you are projecting Press the KEYSTONE key on the from an oblique angle, perform keystone Remote Commander once or select adjustment.

  • Page 20: Correcting Image Twist (Warp Correction Feature)

    Correcting Image Twist (Warp Correction Feature) You can correct image twist with the warp correction feature. Press the KEYSTONE key on the Remote Commander once or select “Screen Fitting” in the Installation Press the RESET key to restore the menu (page 35). projected image before adjustment.

  • Page 21: Blending Projections From Multiple Projectors On A Screen

    Press the RESET key to restore the projected image before adjustment. Press the RESET key to restore the projected image before adjustment. When correcting deflection on the Note top/bottom sides of the image *1: The setting may not be reset depending on the combination of adjustment values of Move x using V/v/B/b to select the the Screen Fitting setting items.

  • Page 22: Turning Off The Power

    Select “Multi Screen” in the Installation and/or install deflection partitioning between menu, then select “Edge Blending” them. (page 35) For more details, consult with qualified Sony personnel. Enable the Edge Blending function. In “Blend Settings,” set “Edge Turning Off the Power Blending”...

  • Page 23: Using A Menu

    B Adjustments and Settings Using a Menu To return to the selection screen of the Using a Menu setting items, press the B key or the RETURN key. Also, to reset the setting value of an item to its factory preset value, press the RESET key during Note setting or adjusting.

  • Page 24: The Picture Menu

    The Picture Menu For adjusting the picture for each input signal. Setting items Description Picture Mode Dynamic: Emphasizes the contrast to produce a “dynamic” picture. Standard: Makes the picture be natural and well balanced. Brightness Priority: Makes the picture bright to suit a bright environment. Multi Screen: Optimizes the picture quality to suit projecting using multiple projectors.
  • Page 25 Setting items Description Expert Setting Reality Adjusts the detail and noise processing of images. (Super-resolution function) On: Adjusts the settings of “Reality Creation.” Creation Resolution: When you increase the setting value, the texture and detail of the image become sharper. Noise Filtering: When you increase the setting value, the noise (picture roughness) becomes less prominent.
  • Page 26 *2: The display position of the status during the test works together with the “Menu Position” setting (page 31). *3: Available when a computer signal is input from the DVI-D input terminal (INPUT B), HDMI input terminal (INPUT C), or HDBaseT input terminal (INPUT D). This projector is not to be used as a device for medical diagnosis.

  • Page 27: The Screen Menu

    The Screen Menu For adjusting the size, position, and aspect ratio of the projected image for each input signal. Setting items Description Aspect Changes the aspect ratio of the projected image (page 29). When the Full 1: Displays the image to fit the maximum projected image size without computer changing the aspect ratio of the input signal.
  • Page 28 *2: Available when a video signal is input from the RGB/YP input terminal (INPUT A), DVI-D input terminal, HDMI input terminal, and HDBaseT terminal. *3: Available when “Aspect” is “Zoom” and “Screen Aspect” is 16:10 or 16:9. *4: Available when a computer signal is input from the RGB/YP input terminal (INPUT A).
  • Page 29 Aspect *1: If you select “Normal,” the image is Input signal Recommended projected in the same resolution as the setting value and input signal without changing the aspect projected image ratio of the original image. *1 *2 (4:3) (Full 1) *2: If you select “Full 2,”...

  • Page 30: The Function Menu

    The Function Menu The Function menu is used for setting various functions of the projector. Setting items Description Audio Output Vol. The higher the setting, the higher an audio level output from the audio output terminal. The lower the setting, the lower the audio level. Smart APA On/Off: When set to “On,”...

  • Page 31: The Operation Menu

    *1: When “All Off” is selected, warning message for high temperature is not displayed. *2: Note that Sony is not liable for failure of the unit or any accident caused by selecting “All Off.” *3: You will not be able to use the projector if you forget your password. If you call qualified Sony...
  • Page 32 serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password.

  • Page 33: The Connection/Power Menu

    The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Setting items Description Network Setting IPv4 Setting IP Address Setup Auto(DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: To specify the IP Address manually.
  • Page 34 Setting items Description *7 *8 With Static Signal Light Dimming : If an image does not change for about 10 seconds, light output is gradually reduced (approximately 10% to 15%* ) from that set in the Light Output Mode. This setting provides a convenient way to reduce power consumption.

  • Page 35: The Installation Menu

    The Installation Menu The Installation menu is used for installing the projector. Setting items Description Screen Fitting Adjusts the distortion of the projected image that occurs due to installation conditions or when a portion of the image spreads beyond the screen. Warping: Select an adjustment point and move it vertically/horizontally to adjust the image distortion.
  • Page 36 Setting items Description Blend Configure the Edge Blending setting for the top, bottom, right, and left of Settings the screen respectively. Left/Right/Top/Bottom: Set the Edge Blending effect for each position. Edge Blending: Set “On” to set “Blending Range” or “Blend Start Pos.” Blending Range: Set the width where images are overlapped.
  • Page 37 Setting items Description Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture. When set to “On,” “Adjust Color” and “Pattern Color” can be assigned and adjusted. Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.

  • Page 38: The Information Menu

    The Information Menu The Information menu enables you to confirm various information on the projector, such as the total usage hours of a light. Items Description Model Name Displays the model name. Serial No. Displays the serial number. fH / fV (horizontal Displays the horizontal frequency/vertical frequency/signal type of the frequency/vertical current input signal.

  • Page 39: Using Network Features

    B Network Set the network settings for the Using Network projector using “Network Setting” on the Connection/Power menu Features (page 33). Connection to the network allows you to Start a web browser on the computer, operate the following features: enter the following in the address field, •...

  • Page 40: Setting Access Limitation

    Alphabet is case-sensitive. Using the e-mail Report The default password “Projector” cannot be Function set as a new password. Set the e-mail report function on the Setup Note page. If you forget your password, consult with qualified Sony personnel.
  • Page 41 Entered values will not be applied unless Enter the outgoing e-mail address in you click on [Apply]. the Email Address box then check the Report Timing check box of the e-mail Owner information Click on [ ] to enter report to be sent. the owner information recorded in the mail report.

  • Page 42: Setting The Lan Network Of The Projector

    -Primary DNS: Input the primary DNS Setting the LAN Network of server of the projector. the projector -Secondary DNS: Input the secondary DNS server of the projector. Set the LAN network function on the Setup page. (b) Setting the IPv6 address Entered values will not be applied unless Obtain an IPv6 address you click on [Apply].

  • Page 43: Setting The Control Protocol Of The Projector

    Setup page. Entered values will not be changed. Only four alphanumeric applied unless you click on [Apply]. characters can be input. The factory default setting is “SONY.” It is Click on [Advanced Menu] to display recommended that the community name the buttons for more settings.
  • Page 44 Only four alphanumeric -Password: characters can be input. The factory Input the authentication password for PJ default setting is “SONY.” It is Link. For the factory default password, recommended that the community name refer to the PJ Link specifications.
  • Page 45 (e) Set the system service. (f) Reset the network settings. System service setting area Reset button Reset Reset: Service button Reset all Web browser settings to their Start DDDP Service: factory defaults. Set DDDP to enabled or disabled. For details, refer to the DDDP specifications in the reference from AMX Corporation.

  • Page 46: Indicators

    B Others Indicators You can check the projector status or abnormality by checking the lighting/flashing status of the ON/STANDBY indicator and WARNING indicator on the front. If the indicators flash in red, address the problem in accordance with “Warning indicators and remedies” (page 47). ON/STANDBY WARNING indicator...
  • Page 47 If the indicators flash in a manner other than described above, unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. If the problem still persists, consult with qualified Sony personnel.

  • Page 48: Messages List

    Although “Constant Brightness” is selected, the brightness that cannot be maintained. is set cannot be maintained due to the lifetime of the light source. Consult with qualified Sony personnel. Filter cleaning will start. The filter will be automatically cleaned after the projector is turned off.

  • Page 49: Troubleshooting

    Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptom Remedy Page The power is not turned Check if the AC power cord is firmly connected. – When the “Control Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector.
  • Page 50 Symptom Remedy Page The image is dark/too The settings for “Brightness,” “Contrast,” and “Light Output bright. Mode” affect brightness of the image. Check if the value is appropriate. “With Static Signal” is set to “On.” When video signal is not input, the light is dimmed to reduce power consumption.

  • Page 51: Cleaning The Air Filter

    For details on a new air filter, consult with qualified Sony personnel. Caution Loosen the screws (four) and pull out If you continue to use the projector even...

  • Page 52: Replacing The Projection Lens

    Clean the air filter with a vacuum Replacing the cleaner. Projection Lens Replace the air filter and attach the filter cover. When attaching the filter cover, fit the Notes two tabs on the right into place, turn the • Avoid removing/attaching the lens with the filter cover using the right side as an projector installed suspended from a ceiling.

  • Page 53: Attaching

    projection lens counterclockwise to pull out the lens straight. Note LENS RELEASE When attaching the projection lens, do not Projection lens button press the LENS RELEASE button. Attaching Fully insert the projection lens with the index on the lens facing toward the top surface of the main unit.

  • Page 54: Specifications

    Number of pixels 6,912,000 (1920 × 1200 × 3) pixels Light source Laser diode Light output VPL-FHZ65: 6,000 lm (when “Light Output Mode” is set to “High”) VPL-FHZ60: 5,000 lm (when “Light Output Mode” is set to “High”) Displayable...
  • Page 55 Storage humidity Power required VPL-FHZ65: AC 100 V to 240 V, 5.5 A to 2.3 A, 50/60 VPL-FHZ60: AC 100 V to 240 V, 4.5 A to 1.9 A, 50/60 Power AC 100 V to VPL-FHZ65: 509 W...
  • Page 56 Item Description Model name VPL-FHZ65/VPL-FHZ60 Power AC 100 V to VPL-FHZ65: 15.0 W (LAN), 15.0 W (HDBaseT), 15.0 consumption 120 V W (All Terminals and Networks Connected) (Networked (when “Standby Mode” is set to “Standard”) Standby Mode) VPL-FHZ60: 15.0 W (LAN), 15.0 W (HDBaseT), 15.0 W (All Terminals and Networks Connected) (when “Standby Mode”...
  • Page 57 *2: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. *3: Information on accessories in this manual is current as of July 2015. Design and specifications of the unit, including the optional accessories, are subject to change...
  • Page 58 RGB input terminal (Mini D-sub 15- Pin assignment pin, female) DVI-D terminal (DVI-D, female) Video input Power supply T.M.D.S. +5 V Power (red) R input for DDC Data2– Video input T.M.D.S. Ground (return (green) G Data2+ for +5 V) Video input T.M.D.S.
  • Page 59 HDMI terminal (HDMI, female) Input terminal fH [kHz]/ INPUT B/ Resolution fV [Hz] INPUT A INPUT C/ INPUT D 800 × 600 35.2/56 – T.M.D.S. T.M.D.S. 37.9/60 Data2+ Clock Shield 48.1/72 – T.M.D.S. T.M.D.S. Data2 Shield Clock– 46.9/75 – T.M.D.S. 53.7/85 –...
  • Page 60 Video signal Input terminal INPUT B/ Signal fV [Hz] VIDEO INPUT A INPUT C/ INPUT D NTSC – – PAL/ – – SECAM 480i – 576i – 480p – 576p – 1080i – 1080i – 720p – 720p – 1080p –...

  • Page 61: Projection Distance And Lens Shift Range

    Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Front of the lens Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image.

  • Page 62: Projection Distance

    Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height Standard lens VPLL-3007 VPLL-Z3009 80" (2.03 m) 1.72 × 1.08 2.36 – 3.86 1.09 1.44 – 1.69 (68 × 42) (93 – 152) (43) (57 – 66) 100"...

  • Page 63: Lens Shift Range

    Lens shift range x Standard lens, VPLL-Z3024, VPLL-Z3032 = 60 – 1.875 × (HS or HS ) [%] – = 5 – 0.156 × (HS or HS ) [%] – – = HS = 32 – 0.533 × VS – = HS = 32 –...

  • Page 64: Dimensions

    Dimensions Front Unit: mm (inches) 460 (18 Center of the lens 230 (9 Bottom Unit: mm (inches) 515 (20 425 (16 406 (15 284 (11 133 (5 69 (2 ø24 ( 13 (...
  • Page 65 When using the PSS-610 projector suspension support Unit: mm (inches) 249 (9 150 (5 274 (10 175 (6 299 (11 200 (7 349 (13 250 (9 374 (14 275 (10 399 (15 300 (11 Center of the lens 234 (9 281 (11 Center of the lens...
  • Page 66 Caution label CLASS 1 RG3 LABEL Explanatory label CLASS 3R LABEL Light source specifications Beam divergence angle from lens of this unit 3.75 W laser diodes × 32 (VPL-FHZ65) × 28 (VPL-FHZ60) Wavelength: 450 - 460 nm Laser emission port...
  • Page 67 About Trademarks Lens Zoom Zoom maximum: α minimum: α • Adobe Acrobat is a trademark of Adobe Systems Incorporated. Standard lens 45.3° 29.4° • Kensington is a registered trademark of VPLL-3007 84° – Kensington Technology Group. • Internet Explorer is registered trademarks VPLL-Z3009 69°...

  • Page 68: Index

    Dynamic Range ........33 Index ECO ............33 ECO MODE (Energy-saving mode) ..7 AC IN socket ..........6 Edge Blending ......... 35 Acceptable input signal ......59 E-mail report ...........40 Adjust Signal .......... 27 Expert Setting .......... 25 All Reset ..........30 Antitheft bar ..........
  • Page 69 Lens shift range ........63 Screen menu ..........27 Light Output Mode ......... 24 Security Lock .......... 31 Light Settings .......... 24 Selecting an input signal ......6 Light Timer ..........38 Serial No..........38 Location and function of controls ..... 4 Sharpness ..........
  • Page 70 Sony Corporation...

This manual is also suitable for:

Vpl-fhz60Vpl-fhz57Vpl-fwz65Vpl-fwz60

Table of Contents