Table of Contents
Advertisement
1-6. Disassembly
. The laser diode is used as a light source of this unit.
Never allow the light source to emit light with the cabinet removed.
Otherwise, it may cause damage to eyes or skin.
. Do not remove the lens when the set is lighting.
Otherwise, it may cause damage to eyes or skin.
. Do not release the protection circuit with the cabinet removed.
Otherwise, the light source may suddenly start emitting light, causing damage to eyes or skin.
. In order to avoid inappropriate use of the laser diode, do not disassemble the laser source unit.
. When performing the adjustment that requires turning the power of this unit off and on, be sure to
perform the operation with the top cover assembly attached.
. In this section, remove parts in the order of numbers shown in the figure.
. This unit supports the optional lens. For the lens that can be attached, refer to Section 3.
. When removing the lens, press the [SHIFT] button of this unit or the [LENS|SHIFT] button of the
remote control, then press the [RESET] button of the remote control to move the lens shift unit to the
center position.
1-4 (E)
VPL-FHZ65
Advertisement
Table of Contents
