Page 4
3:2011+A2:2013+A11 :2014+A12:2014+A13:2015, EN 50581 :2012 15.:;f °' · 2018-03-28, Bernd Fleischma nn Direktor Produktent stehung & Qu alita/ (Vice Pre si dent Product Engineering & Quality) *4) Met abowerke GmbH - Metabo-Allee 1 - 72622 Nuerti n ge n, Germany...
Incorrectly sized accessories cannot be adequately guarded or The flat head angle grinders, when fitted with controlled. original Metabo accessories, are suitable for f) Threaded mounting of accessories must grinding, sanding, cut-off grinding and wire match the grinder spindle thread. For...
Page 8
ENGLISH en and carefully re-enter the cut. The wheel may Use of a fixed extractor system is recommended. bind, walk up or kickback if the power tool is Always install an RCD with a maximum trip current restarted in the workpiece. of 30 mA upstream.
en ENGLISH �1/ - do not direct the escaping particles and the Use only accessories that c:::o:::x exhaust air stream at yourself or nearby persons are covered by at least 3.4 or on dust deposits, mm by the safety guard. - use an extraction unit and/or air purifiers, (Disassemble in reverse - ensure good ventilation of the workplace and keep...
ENGLISH en 8. Use Adjusting the speed (depending on features) Set the recommended speed at the thumbwheel Switching on: Slide the trigger switch (13) in the (11 ). (small number= low speed; large number= direction of the arrow and press the trigger high speed) switch (13).
The fluctuations disappear, however, as soon as the interference fades away. Permits numerous handle positions. The technical specifications quoted are subject to See www.metabo.com or the catalogue for a tolerances (in compliance with the relevant valid complete range of accessories. standards).
Page 12
ENGLISH en Kh SG/ S = Uncertainty (vibration) � IypictL A-effective perceived sound levels: L pA = sound-pressure level L wA = Acoustic po w er level K p A • K wA = Uncertainty During operation the noise level can exceed 80 dB(A).