Manual Start - Victron energy CCGX Manual

Last update: 2018-03-21 12:57 ccgx:generator_start_stop https://www.victronenergy.com/live/ccgx:generator_start_stop?rev=1521633420
Test interval start date: The interval count will start based on this date, this setting can be
set in the future and the interval will be ignored till the set date is reached.
Start time: Time of day in which the generator will start
Test duration: Duration of the test
Run until battery is fully charged: Stops the generator after the battery is fully charged
instead of a fixed amount of time

Manual start

Use the manual start to directly start the generator. If the generator is already running you can use
this option to make sure that the generator won't stop automatically when the active condition
becomes inactive.
There are two ways to start the generator manually:
Using menu: Go to Generator start and stop → Manual start and use the switch to start the
generator.
Using generator page: Press the top-left button to show the generator page. Once in the
generator page press the center button, when pressed you will be asked how to stop the
generator, manually or using a timer. Once selected the stop mode a countdown of five seconds
will start, you can abort the manual start by pressing the center button.
https://www.victronenergy.com/live/ Printed on 2020-11-11 18:41