Victron energy CCGX Manual page 2

Last update: 2018-03-21 12:57 ccgx:generator_start_stop https://www.victronenergy.com/live/ccgx:generator_start_stop?rev=1521633420
1. Enable the "AutoStart" function in the Fischer Panda generator control panel.
2. Go to the Fischer Panda genset page and set the Mode setting to "Auto start/stop"
Once the Mode is set, all settings will become available under the Auto start/stop menu entry at the
bottom of the page.
Main page
Generator state: Condition that is currently keeping the generator running.
Error: Error description.
Runtime: Generator runtime since last start.
Total run time: Accumulated running time since the first start.
Time to next test run: When the test run condition is enabled this item shows the time
remaining to the next test run.
Daily runtime: Page with the running times of last 30 days.
Settings: Generator start and stop settings menu.
Settings
https://www.victronenergy.com/live/ Printed on 2020-11-11 18:41