Advanced Mode - Bowers M1 User Manual

M1 – M3 Display Units

10.2. Advanced mode :

It is possible to connect a QR code reader (55-HD3430-BKK1B), and to input a
manufacturing order number on the display.
After scanning the QR code corresponding to the manufacturing order number, the
number will appear on the top bar of the measuring screen, and the output csv file will
get the name of the scanned name. Then each time you scan a new number, after
saving the first part, a file is created on the USB key.
The command to encode the QR-code is : OFA=xxxxxxxxxxxx
Example :
Standard screen before scanning manufacturing number:
After scanning the following QR code, corresponding to the command
OFA = ORDER 12345
The screens become like this:
Then when you press the PRINT button the first time, a file is created on the USB key
with the name: ORDER 12345.csv
Page 72