Introduction; Product Presentation; Versions - Bowers M1 User Manual

2. INTRODUCTION

2.1.

PRODUCT PRESENTATION

The M1 and M3 display units allow making dimensional control using 1 or 2 air
gauges. Depending on the version it is possible to make simple measurement (with
one air gauge), or display 2 characteristics on the screen and can make static
measurement or dynamic (Max, Min, Max-Min...)
The M1-M3 can be connected to a PC thanks to its RS232 or USB connection.
A footswitch can be connected in order to transfer measurements.
The M1 / M3 displays for air gauges requires a minimum of 2 masters for calibration.

2.2. VERSIONS

REF
55-AIR 1 (M1)
55-AIR 2 (M3)
Page 6
Description
Display unit M1 for 1 air gauge
Display unit M3 for 2 air gauges or 1 air
gauge with 2 measuring levels
M1 – M3 Display Units