Page 40
M1 – M3 Display Units
Allows to display 2 probe on the
measuring screen (except in
GALVA mode)
Galva :
None : simple and double
Allows to remove the value of the
measurement on the measuring
screen, only the bargraph
appears.
Ajouter mode curseur
Displays small indicators
(triangles) on the measuring
Galva :
screen to show the maximum and
minimum value measured
None : simple and double
Ajouter mode curseur
None : simple and double
Allows to move the needle like
with the screw on an old analogue
display.
Ajouter mode curseur
Galva :
None : simple and double