Bowers M1 User Manual page 33

M1 – M3 Display units
Resolution
000.000 = micron
00.0000 = 0.1 micron
Unit
mm : millimeters
In : inches
Deg = decimal degrees (automatic choice when the formula is set as Taper)
Mode
Static = direct reading: The display reads live size change.
Dynamic : The following mode starts after pressing on the "clear" button of the
measuring screen. (or through a I/O or footswitch command)
 Max
 Min
 Max-Min
 Average
 Median = (max+min)/2
Page 33