Part 3 - Class - Bowers M1 User Manual

6.1.3. Part 3 - class

This screen allows to set up a sorting of the part according to their size. Up to 16
classes can be programed.
The class has an important utility, because it allows the user to sort the parts
according to their position in the tolerance interval. The top bar of the display, which
is normally blue is grey on the picture bellow, because grey is the color which was
defined for this interval of measurement.
Page 36
The limit defined for each class are
selected by default but they can be
changed by the user
M1 – M3 Display Units
Choice of the number of
class
Choice of the colour
for each class