6.1.1. Part 1
Choice of the calculation formula:
C(1)
C(2)
C(1) + C(2)
C(1) - C(2)
-C(1)
-C(2)
-C(1)+C(2)
Taper
« C » means « Channel »
It is possible to give a coefficient for each probe
from the menu
Page 32
M1 – M3 Display Units
Static = direct reading or
dynamic : Max, Min, Max-
Min, Average or Median
For measuring internal or
external diameters. It defines the
indicators colour, and gives
information to the user if the part
can be used again.