Table of Contents
Advertisement
M1 – M3 Display units
10. DATA EXPORT ON USB KEYS
The M1 and M3 offer various possibilities for data export.
From the software version 2.1 new functionalities have been added offering the
possibility to export with advanced functions to USB keys or network.
The M1/M3 are compatible with most of the available USB key.
However, some particular models are not compatible. It is also not compatible with
USB stick having a partition.
For saving the data on the USB key, you must configure the menu CONFIGURATION
COMMUNICATION USB Key
Then, when the transfer is triggered (by footswitch, touch of the PRINT button, by an
input action or Modbus), a file will be created on the USB key.
10.1. Standard mode :
As a standard a file named "output.csv" is created on the USB key. It look likes this :
Output.csv :
Characteristic
Name
P1 : C(1)
Upper tol.
+0.02100
Nominal
+20.00000
Lower tol.
+0.00000
Measure
+20.00012
Measure
+20.00011
Measure
+20.00010
1
2
P2 : C(2)
-0.00700
+20.00000
-0.02000
+19.99350
GO
+19.99340
GO
+19.99980
NG
COMMENT
Name of the characteristics (PART x –
CHANNEL x)
Upper tolerance
Nominal value
Lower tolerance
Data #1 + indication GO
Data #2 + indication GO
Data #3 + indication NG
Page 71
Advertisement
Table of Contents
