Rs232 Communication; Commands; General - Bowers M1 User Manual

9. RS232 COMMUNICATION

The M3 can communicate with an ASCII protocol allowing to master and configure all the
functions.
For connecting the M3 to a PC or a PLC, you must use a cable 30-926-5608, sold
separately.
9.1.

Commands

9.1.1. General

All the commands must be ended by a « CR » character. (ASCII code 13/ $0D).
The commands can be sent grouped by separating with a « ; » (max 500 characters).
The display is refreshed only once after reception of the « CR » character.
Page 66
M1 – M3 Display Units