Led's - Victron energy Orion-Tr Smart Manual

6. LED's

The LEDs will change its state to warn what the Orion Smart is doing at the moment. There are two LEDs, the blue LED is
dedicated to Bluetooth functionality and the green LED to product state.
Status LED (Green LED)
• LED off:
• No input voltage
• Remote shutdown;
• Shutdown by the user;
• Connector over-temperature protection
• User defined under voltage lock-out
• Engine off detected (when in Charger mode)
• LED on:
• Output active on Power supply mode
• Charger in Float State (Battery charged);
• LED Blinking at 1.25Hz:
• Charger in Bulk or Absorption State (Battery is being charged);
BLE LED (Blue LED)
• LED off:
• No input voltage;
• LED Blinking at 0.33 Hz:
• Error – needs to be checked on VictronConnect;
• LED Blinking at 1.25 Hz
• Connected via Bluetooth
• LED Blinking at 2.5 Hz:
• Identify;
• LED Blinking once every 5 seconds:
• Charger off due to non-error conditions as:
• Remote shutdown;
• Shutdown by the user;
• User defined under voltage lock-out;
• Engine off detected (when in Charger mode);
• LED on
• All other conditions
Page 11
Orion-Tr DC-DC Smart Charger Non-Isolated
LED's