Ank - Fresenius Medical Care 460018 Operator's Manual

7 . 2 T R A N S F E R
7.2 T T S
RANSFER O
CAUTION! C

D A C
RY CID ASE TO BE CERTAIN THEY ARE THE SAME
1. After you have obtained a valid specific gravity reading, remove the Transfer Hose from the
Transfer Nozzle.
2. Connect Transfer Hose to the storage tank and OPEN the Main Transfer Ball Valve at the side of the
Filter Housing. Press the Dissolution START button to transfer concentrate into the storage tank
(Figure 13).
3. Once Transfer of solution is complete, CLOSE the Main Transfer Ball Valve, and place Transfer Hose
onto the Dry Acid Dissolution Unit Transfer Hose Holder. Do not leave Transfer Hose attached to
the Storage Tank (see Figure 18).

CAUTION! I
F THE PUMP IS RUN DRY FOR LONGER THAN
P/N 460018 Rev. D
T O S T O R A G E
T :
TORAGE

ANK

CATALOG NUMBER
OMPARE THE
st
1 - Connect Transfer
Hose to storage tank
Compare Catalog
Number on
Storage Tank
to Catalog Number
on Fresenius
Medical Care Dry
Acid Product.
T A N K
ON THE STORAGE TANK WITH THE
.
nd
2 - Open
Main
Transfer
Ball Valve
Transfer
rd
3 - Press
Hose
Dissolution
START button
Figure 13
30
SECONDS IT MAY CAUSE
CATALOG NUMBER
ON THE
Transfer Hose
Holder
P .
UMP FAILURE
21