Advertisement
F
T
I R S T
H I N G S
Before a display appears, the instrument will automatically perform hardware and software self-tests, followed
by a full system calibration. The front panel STANDBY L ED will be lit during this sequence. The full testing
procedure will take about 10 seconds, after which a display appears.
UTILITIES
4.
Press
to display the UTILITIES on-screen menus.
5.
Then press the button beside the menu
GE T TO KN OW WAVE RUN N E R – BACK PAN E L
RS-232-C Port
Centronics Port
BN C Signal Output
Power Input
U se the R S -232-C and G PI B ports to connect your Waverunner scope to a computer or terminal, the
external monitor port to display your waveforms on another monitor, and the C entronics
connect compatible printers or other devices. U se the PC C ard slot for the PC M emory C ard and
portable H ard D isk options, and the BN C out put for external clock signals.
10
to set the time and date.
E xternal Monitor Port
(Memory/ H ard-Disk card )
ISSUED: January 2002
PC Card Slot
GPIB Port
port to
LTXXX-OM-E Rev B
Advertisement
