Advertisement
ADD AN OPTION
This menu will also be displayed when you select System:
Use it to install new options — without the need to return your Waverunner for a refit.
1.
Press that menu's button to display
2.
Then press that menu's button to display the ADD OPTION menus. Use them whenever you wish to add
a Waverunner option by means of a special code. Contact your LeCroy sales or service center to obtain the
code.
UPDATE TO THE L ATE ST FIRMWARE
Your Waverunner comes with the latest firmware installed. But to take advantage of our continuous
improvement, contact us to obtain a floppy disk or card containing the latest firmware. Then use these menus
to install it:
UTILITIES
1.
Press
to display the UTILITIES menus.
2.
Press the button for
3.
Place the floppy or card in the Waverunner and press the buttons to select Floppy or Card and then
Update Flash. The newly installed firmware will appear on the System Status screen (see above).
You may also download the firmware from the internet, using ScopeExplorer.
SAVE THE SCRE E N (AN D E N E RGY)
Enable or disable your Waverunner's screen saver:
DISPLAY
1.
Press
to show the DISPLAY SE TUP menus.
2.
Press the button for "More Display Setup" to access this menu:
L TXXX-OM-E Rev B
, then for the one for
ISSUE D: January 2002
First
.
13
Advertisement
