Advertisement
F
T
I R S T
H I N G S
RE PLACE WITH THE CORRE CT FUSE S
For continued fire protection at all line voltages, replace fuses only with those of the specified type and rating.
Disconnect the power cord before inspecting or replacing a fuse. Open the fuse holder (located directly to the
left of the mains power plug) using a small, flat-bladed screwdriver. Remove the old fuse and replace it with a
new 5x20 mm fuse (T 6.3 A/ 250 V).
CLE AN YOUR WAVE RUN N E R (BUT LE T US MAIN TAIN IT)
Maintenance and repairs should be carried out exclusively by a LeCroy technician.
Clean only the exterior of your Waverunner, using a damp, soft cloth. Do not use chemicals or abrasive
elements. Under no circumstances allow moisture to penetrate the oscilloscope. To avoid electric shocks,
disconnect the instrument from the power supply before cleaning.
8
Risk of electric shock. N o user
serviceable parts inside. Leave repair
to qualified personnel.
ISSUED: January 2002
CAUTION
LTXXX-OM-E Rev B
Advertisement
