Lutron Electronics Maestro MS-OPS2 1 Series Manual page 16

Maestro
Wiring Diagrams
Wiring Diagram 7 - with Neutral
Single Location Installation (120-277 V~)
-OPS6M2U-DV, -VPS6M2U-DV
Occupancy
sensor switch
120-277 V~ 50 / 60 Hz
Black
Hot/Live
Bare
Ground
Neutral
Note: When a neutral connection is available, connect the white-sleeved wire to neutral.
Wiring Diagram 7 - without Neutral
Single Location Installation (120-277 V~)
-OPS6M2U-DV, -VPS6M2U-DV
Occupancy
sensor switch
120-277 V~ 50 / 60 Hz
Black
Hot / Live
Bare
Ground
Neutral
Note: Remove white sleeve and connect green wire to ground only in retrofit and replacement applications.
1
When using controls in single location installations, tighten the blue terminal or cap blue wire. Do NOT connect the blue terminal / wire to any other
wire or to ground.
2 Fan load applies to 120 V~ only (not for 277 V~).
3
Only one occupancy sensor switch can be used per multi-location circuit.
4
A single standard mechanical 3-way switch or up to 9 companion switches may be connected to most occupancy sensor switches.
Standard mechanical 3-way switch cannot be combined with companion switch. Total blue terminal wire length may be up to 150 ft (46 m).
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
Switch with Occupancy / Vacancy Sensor
(continued)
Blue 1
Black
White-
Load
sleeved wire
Blue 1
Black
Green
Load
Model Numbers:
1, 2
1, 2
Sensor
369666f 16 09.05.19
Continued on next page...
Page
16