Lutron Electronics Maestro MS-OPS2 1 Series Manual page 11

Maestro
Wiring Diagrams
Wiring Diagram 3 - without Neutral
3-way Installation with Standard Mechanical Switch (120 V~)
-OPS5M, -OPS6M2-DV, -VPS5M, -VPS6M2-DV
Hot/Live
Jumper wire
120 V~
50 / 60 Hz
Neutral
OR
Hot/Live
120 V~
50 / 60 Hz
Neutral
Note: Connect green-sleeved wire to ground only in retrofit and replacement applications.
1 When using controls in single location installations, tighten the blue terminal or cap blue wire. Do not connect the blue terminal / wire to any other
wire or to ground.
2
Only one occupancy sensor switch can be used per multi-location circuit.
3
A single standard mechanical 3-way switch or up to 9 companion switches may be connected to most occupancy sensor switches.
Standard mechanical 3-way switch cannot be combined with companion switch. Total blue terminal wire length may be up to 150 ft (46 m).
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
Switch with Occupancy / Vacancy Sensor
(continued)
Standard
mechanical switch
Different color
screw (Common)
Green
screw
Ground
Occupancy
sensor switch
Black
Black
Blue
Green-sleeved wire
Bare
Ground
Model Numbers:
2, 3
Occupancy
sensor switch
Black
Black
Blue
Green-sleeved wire
Bare
Ground
Standard
mechanical switch
Different color
screw (Common)
Jumper wire
Green
screw
Ground
Sensor
369666f 11 09.05.19
Load
Load
Continued on next page...
Page
11