Lutron Electronics Maestro MS-OPS2 1 Series Manual page 14

Maestro
Wiring Diagrams
Wiring Diagram 5 - with Neutral
Multi-Location Installation (120 V~)
-OPS5M, -OPS6M2-DV, -VPS5M, -VPS6M2-DV with MA-AS or MSC-AS
MA-AS or
MSC-AS
Hot / Live
Black
Green
120 V~
50 / 60 Hz
Ground
Neutral
Note: When a neutral connection is available, remove the green sleeve and connect the white wire to neutral.
Wiring Diagram 5 - without Neutral
Multi-Location Installation (120 V~)
-OPS5M, -OPS6M2-DV, -VPS5M, -VPS6M2-DV with MA-AS or MSC-AS
MA-AS or
MSC-AS
Hot / Live
Black
Green
120 V~
50 / 60 Hz
Ground
Neutral
Note: Connect green-sleeved wire to ground only in retrofit and replacement applications.
1
A single standard mechanical 3-way switch or up to 9 companion switches may be connected to most occupancy sensor switches.
Standard mechanical 3-way switch cannot be combined with companion switch. Total blue terminal wire length may be up to 150 ft (46 m).
2
Only one occupancy sensor switch can be used per multi-location circuit.
3
Fan load applies to 120 V~ only (not for 277 V~).
4 Occupancy sensor switch can be installed in any location.
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
Switch with Occupancy / Vacancy Sensor
(continued)
1, 2, 4
MA-AS or
MSC-AS
Blue
Black
Brass
Green
1, 2, 4
MA-AS or
MSC-AS
Blue
Black
Brass
Green
Model Numbers:
Blue
Brass Black
Ground
Blue
Brass Black
Ground
Occupancy
sensor switch 4
Blue
Black
White
Bare
Load
Ground
Occupancy
4
sensor switch
Blue
Black
Green-
Bare
sleeved
wire
Load
Ground
Sensor
369666f 14 09.05.19
Continued on next page...
Page
14