Lutron Electronics Maestro MS-OPS2 1 Series Manual page 12

Maestro
Wiring Diagrams
Wiring Diagram 4 - with Neutral
3-way Installation with Standard Mechanical Switch (277 V~)
-OPS6M2-DV, -VPS6M2-DV
Hot/Live
screw (Common)
Jumper wire
120 V~
50 / 60 Hz
Neutral
OR
Hot/Live
120 V~
50 / 60 Hz
Neutral
Note: When a neutral connection is available, remove the green sleeve and connect the white wire to neutral.
1
A single standard mechanical 3-way switch or up to 9 companion switches may be connected to most occupancy sensor switches.
Standard mechanical 3-way switch cannot be combined with companion switch. Total blue terminal wire length may be up to 150 ft (46 m).
2
Only one occupancy sensor switch can be used per multi-location circuit.
3
Fan load applies to 120 V~ only (not for 277 V~).
4 Occupancy sensor switch can be installed in any location.
S P E C I F I C AT I O N S U B M I T TA L
®
Job Name:
Job Number:
Switch with Occupancy / Vacancy Sensor
(continued)
Standard
mechanical switch
Different color
Green
screw
Ground
Occupancy
sensor switch
Black
Black
Blue
White
Bare
Ground
Model Numbers:
1, 2, 3
Occupancy
sensor switch
Black
Black
Blue
White
Bare
Ground
Standard
mechanical switch
Different color
screw (Common)
Jumper wire
Green
screw
Ground
Sensor
369666f 12 09.05.19
Load
Load
Continued on next page...
Page
12