Receiving A Group Call - Motorola TETRA MTM800 Manual

3. To select a talkgroup other than the one shown, press
or
confirm your selection.
Press
PTT
4. To select a range other than the one shown, press
the
Range
Press
in the new range)
last selected talkgroup in this range.
When you start a call, members of the selected talkgroup
who have their units turned on, will receive the transmission.
The 'No Group' message is displayed when you are out of the
normal coverage area of your selected talkgroup. If so, select a
new talkgroup that is valid for your working location.

Receiving a Group Call

Unless it is engaged in an active call, your MTM800 will
automatically switch to Group Mode and receive the
transmission. To answer the call, press and hold PTT.
Your MTM800 shows the Group Name, and the caller's
private number or name (alias) if previously stored in your
address book. In case a favourite talkgroup is received, the
terminal will display the "My Groups" range and group alias.
The following screens show examples of how the caller's
private number (ID 124) is displayed.
Range 1
TG 4
Without alias and
Private number
For incoming call alert, see settings in the Tones menu option
(page 83).
When receiving a Group Call, your MTM800 will sound a "New
Group Call" tone (if configured by your Service Provider).
to scroll through the talkgroups. Press
to start the call in the new talkgroup
option, use
to confirm your selection (or PTT to start the call
. The call is set up in the new range and
ID:124
or
TG 4
Private number
without alias
or to scroll.
ID:David
or
TG 4
Private number
with alias
to
.
, select
33